156 Moving or transporting the printer
During ink charging, make sure:
• Not to turn OFF the printer.
• Not to unplug the power cable of the printer.
• Not to open the front cover.
• Not to open the maintenance cover.
• Not to release the pressure rollers.
When ink charging is complete, the message to the left is displayed.
Important!
If the printer perform the nozzle check printing immediately after the initial ink charge is complete, the following results may
occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow "Menu 3: Cleaning" P. 98 and perform “Little Charge”. Then, check the print result.
If there is no improvement in the print result even after performing “Little Charge”, leave the printer unused for an hour or more.
Then perform “Little Charge” again and check the print result.
If there is still no improvement, contact your local MUTOH dealer.
To Next Page
Loading...
