Muton XPJ-1682D - Page 36

36 Calibrating your printer
Print quality calibration steps
[1]
Turn the printer ON and load a roll media.
"Loading a roll media" P. 22
[2]
Tap (Home).
[3]
Tap .
[4]
Tap .
[5]
Use or to choose the user type you want to use.
•Tap (Enter).
[6]
Tap until the menu on the left appears.
•Tap .
[7]
Enter the thickness of the media.
• Use or to specify the thickness.
•Tap (Enter).
[8]
Use or to choose the calibration method.
•Tap .
Menu 1
Setup
Setup 1
User Type
User Type:
Type 1
Type ** : 2
Adjust Print
Thickness:
(80 - 2800) 170 µm
** : Adjust Print 3
Auto
** : Adjust Print 2
Custom
** : Adjust Print 1
Standard