Calibrating your printer 37
Note
• In Standard print quality adjustment and Custom print quality adjustment, the names in the available patterns are different.
For details, refer to the page below.
"Adjust Print 1: Standard" P. 62
"Adjust Print 2: Custom" P. 63
"Adjust Print 3: Auto" P. 63
• For a pre-adjustment check, select “Confirm Pattern.”.
Check the printing results in “Confirm Pattern.”,
• To adjust large misalignment, select “Rough Pattern”.
• To adjust small misalignment, select “Fine Pattern”.
[9]
Follow the steps below and adjust the print quality.
"Standard or Custom Adjustment Methods" P. 65
"Auto Adjustment Method" P. 67
To Next Page
Loading...
