7197 Series II Owner’s Guide Chapter 6: Commands
August 2011
109
Default:
0 (Off)
Turns Italic print mode on or off. This command is only available in 7194 Native Mode
and 7197 Series II Native Mode. Italic print mode is available for built-in, user-defined
characters.
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H49) & Chr$(n)
Exceptions:
Only the lowest bit of n is valid. This command is only valid for the receipt station in 7194
Native Mode and 7197 Series II Native Mode.
Select International Character Set
ASCII: ESC R n or ESC t n
Hexadecimal: 1B 52 n or 1B 74 n
Decimal:
27 82 n or 27 116 n
Value of n:
0 = Code Page 437 US English
1 = Code Page 850 Multilingual
2 = Code Page 852 Slavic
3 = Code Page 860 Portuguese
4 = Code Page 863 French Canadian
5 = Code Page 865 Nordic
6 = Code Page 858 Multilingual with Euro Symbol
7 = Code Page 866 Cyrillic
8 = Code Page 1252 Windows Latin I
9 = Code Page 862 Hebrew
10 = Code Page 1256 (
Windows Arabic)
20 = Code Page Katakana
21 = Code Page 874 Thailand
To Next Page
Loading...
