NCR 7197 II SERIES User Manual

7197 Series II Owner’s Guide Chapter 6: Commands
August 2011
132
Value of n Remote Diagnostic Item Function
ASC Hex Dec
S 53 83 DBCS (for Receipt)
version, 4 digit ASCII
Return DBCS (for Receipt) version, a
total of 6 bytes
W 57 87 DBCS (for Slip) version,
4 digit ASCII
Return DBCS (for Slip) version, a
total of 6 bytes
Ç 80 128 Receipt lines tally,
8 digit ASCII numeric,
max 99,999,999
Write to NVRAM
Example, send 12 bytes to printer: GS
I @ Ç00010000
To set receipt lines tally to 10,000
ü 81 129 Receipt lines tally Write to NVRAM, and print on
receipt to verify
Example, send 12 bytes to printer: GS
I @ ü00010000
This will print on receipt: Receipt
tally written: 10,000
é 82 130 Receipt lines tally Clear receipt lines tally to 0
â 83 131 Receipt lines tally Return receipt lines tally, preceded
by n to identify
Printer returns 10 bytes in above
example: â00010000<CR>
ä 84 132 Knife cut tally,
8 digit ASCII numeric,
max 99,999,999
Write to NVRAM
à 85 133 Knife cut tally Write to NVRAM, and print on
receipt to verify
å 86 134 Knife cut tally Clear knife cut tally to 0
ç 87 135 Knife cut tally Return knife cut tally, returns 10
bytes
É 90 144 Hours on tally,
8 digit ASCII numeric,
max 99,999,999
Write to NVRAM
æ 91 145 Hours on tally Write to NVRAM, and print on
receipt to verify
Æ 92 146 Hours on tally Clear Hours on tally to 0
ô 93 147 Hours on tally Return Hours on tally, returns 10
bytes
ù 97 151 Boot firmware version Return Boot firmware version,
returns 6 bytes
ú A3 163 Flash firmware version Return Flash firmware version,
returns 6 bytes
ñ A4 164 Flash cycles tally,
8 digit ASCII numeric,
max 99,999,999
Write to NVRAM
Ñ A5 165 Flash cycles tally Write to NVRAM, and print on
receipt to verify
a A6 166 Flash cycles tally Clear Flash cycles cut tally to 0

NCR 7197 II SERIES Specifications

General

Brand	NCR
Model	7197 II SERIES
Category	Printer
Language	English