NCR 7197 II SERIES User Manual

7197 Series II Service Manual Chapter 3: Diagnostics
June 2011
40
Disabled -> Short Click
** SET USB INTERFACE TYPE ?
YES -> Long Click
NO -> Short Click
ION (EpiC)* -> 1 Click
NonION (NHPI) * -> 2 Clicks
NonION (PRTR) -> 3 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Ethernet Interface Settings [Standard Model]
** Ethernet RTC Protocol OPTION ?
YES -> Long Click
NO -> Short Click
TCP* -> Long Click
UDP -> Short Click
** SET DATA RECEPTION ERRORS OPTION ?
YES -> Long Click
NO -> Short Click
Ignore Errors -> Long Click
Print ‘?’* -> Short Click
Note: Press the Paper Feed Button for at least one second to validate the selection.
** SET RECEIVE BUFFER SIZE ?
YES -> Long Click
NO -> Short Click
4K Bytes * -> 1 Click
One Line -> 2 Clicks
8K Bytes -> 3 Clicks
12K Bytes -> 4 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Save Parameters
This function allows to save the selected communication settings or return to the
communication settings to select additional options.
Press the Paper Feed Button for the option you want.
Save new parameters ?
YES -> Long Click
NO, MODIFY -> Short Click

NCR 7197 II SERIES Specifications

General

Brand	NCR
Model	7197 II SERIES
Category	Printer
Language	English