7197 Series II Service Manual Chapter 3: Diagnostics
June 2011
43
Printer ID Mode
This function determines which printer ID is currently effective to the printer. They are set
by using the Configuration Menu. (See “Configuring the Printer,” for instructions on how
to enter the Configuration Menu.). The available options are:
7194 Native ID
Emulated Printer ID
7197 Series II Native ID
Press the Paper Feed Button for the printer ID you want.
** SET PRINTER ID MODE ?
YES -> Long Click
NO -> Short Click
7194 Native ID* -> 1 Click
Emulated Printer ID -> 2 Clicks
7197 Series II Native ID -> 3 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
Default Lines Per Inch
This function allows the user to set the default lines per inch printed by the thermal printer
to 6, 7.52 or 8.13. (See “Configuring the Printer” for instructions on how to enter the
Configuration Menu to change this setting.)
Press the Paper Feed Button for the lines per inch you want.
** SET DEFAULT LINES PER INCH?
YES -> Long Click
NO -> Short Click
8.13 Lines per Inch -> 1 Click
7.52 Lines per Inch* -> 2 Clicks
6 Lines per Inch -> 3 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
To Next Page
Loading...
Need help?
General
