7197 Series II Service Manual Chapter 3: Diagnostics
June 2011
46
Set Auto Reset option
Set Auto Reset using the configuration menu. Answer No to the questions printed on the
receipt until you come to the instructions for Auto Reset.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently
changing other settings that might affect the performance of the printer.
Press the Paper Feed Button for the platen waiting time you want.
** SET AUTO RESET ?
Disable * -> 1 Click
10 Sec -> 2 Clicks
20 Sec -> 3 Clicks
30 Sec -> 4 Clicks
40 Sec -> 5 Clicks
50 Sec -> 6 Clicks
60 Sec -> 7 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Set Font Type option
Set Font Type using the configuration menu. Answer No to the questions printed on the
receipt until you come to the instructions for Font Type.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently
changing other settings that might affect the performance of the printer.
Press the Paper Feed Button for the platen waiting time you want.
** SET FONT TYPE?
YES -> Long Click
NO -> Short Click
Font 1* -> 1 Click
Font 2 -> 2 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Save Parameters
This function allows to save the selected communication settings or return to the
communication settings to select additional options.
Press the Paper Feed Button for the option you want.
To Next Page
Loading...
Need help?
General
