NCR 7197 II SERIES - Page 67

7197 Series II Service Manual Chapter 3: Diagnostics
June 2011
47
Set Compatibility Barcode Length option
Set Compatibility Barcode Length using the configuration menu. Answer No to the
questions printed on the receipt until you come to the instructions for Compatibility
Barcode Length.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently
changing other settings that might affect the performance of the printer.
Press the Paper Feed Button for the platen waiting time you want.
** SET COMPATIBILITY BARCODE LENGTH?
YES -> Long Click
NO -> Short Click
Disable -> 1 Click
Enable* -> 2 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Set Compress Pitch option
Set Compress Pitch command using the configuration menu. Answer No to the questions
printed on the receipt until you come to the instructions for Compress Pitch.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently
changing other settings that might affect the performance of the printer.
** SET COMPRESS PITCH CMD?
YES -> Long Click
NO -> Short Click
Enable * -> Long Click
Ignore -> Short Click
Enter code, then hold Button DOWN
At least 1 second to validate
Save new parameters ?
YES -> Long Click
NO, MODIFY -> Short Click