NCR 7197 II SERIES User Manual

7197 Series II Service Manual Chapter 3: Diagnostics
June 2011
49
-15 -> 5 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
Maximum Power
This function allows the user to set the maximum power for the printer to 75W or 55W.
Press the Paper Feed Button for the option you want.
** SET MAX POWER OPTION ?
YES -> Long Click
NO -> Short Click
55W Power Supply* -> Long Click
75W Power Supply -> Short Click
Note: Press the Paper Feed Button for at least one second to validate the selection.
Paper Low Sensor
Paper Low Sensor makes it possible to enable or disable the paper low sensor for
particular printer configurations.
Press the Paper Feed Button for the option you want.
** SET PAPER LOW SENSOR OPTION ?
YES -> Long Click
NO -> Short Click
Enable Paper Low Sensor* -> Long Click
Disable Paper Low Sensor -> Short Clicks
Note: Press the Paper Feed Button for at least one second to validate the selection.
Paper Width
This function allows the user to set the default paper width for the receipt thermal printer
to 58mm or 80mm wide.
Press the Paper Feed Button for the paper width option you want.
** SET PAPER WIDTH ?
YES -> Long Click
NO -> Short Click
Paper Width = 80 mm* -> 1 Click
Paper Width = 58 mm -> 2 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate

NCR 7197 II SERIES Specifications

General

Brand	NCR
Model	7197 II SERIES
Category	Printer
Language	English