NEC DTL-24D-1 - DT330 - 24 Button Display Digital Phone User Manual

99
TO MAKE AN INTERNAL CALL
When dialed station number is registered in Personal
Directory, the corresponding name information will be
displayed on LCD of DT730 Series while you are hear-
ing a ringback tone or are engaged in a conversation.
According to the initial settings, the display may differ
from the following examples. For more information,
contact the system administrator.
STEP 1: Lift handset or press key, receive dial
tone.
STEP 2: Dial desired station number. Display indi-
cates digits dialed.
(while hearing a ringback tone)
• When dialed station number is registered in Personal Di-
rectory
• When dialed station number is not registered in Personal
Directory
STEP 3: Use the handset or MIC to start a conversa-
tion.
(while in a conversation)
• When dialed station number is registered in Personal Di-
rectory
• When dialed station number is not registered in Personal
Directory
Note:
Personal Directory Name Display function is
available only for DT730 Series.
Note:
This section describes the Normal Dial Mode.
About the other mode, see
TO ORIGINATE A
CALL USING SELECTIVE DIALING (DYNAMIC
DIAL PAD, PRESET DIAL) in chapter 5.
DT730/710
DT330/310
Speaker
1:25 PM MON 12 JUL 2010
31313
Station Number
of My Line
Blink
MIC DND >>>
31314
Dialed Station Number
MIC >>>
MARY HARRIS
Name Information registered
in Personal Directory
1:25 PM MON 12 JUL 2010
31314
Dialed Station Number
MIC >>>
31314
Dialed Station Number
Name Information
registered in
Personal Directory
MIC DND >>>
MARY HARRIS

NEC DTL-24D-1 - DT330 - 24 Button Display Digital Phone Specifications

General

Brand	NEC
Model	DTL-24D-1 - DT330 - 24 Button Display Digital Phone
Category	Telephone
Language	English