144
CALL FORWARDING - BUSY LINE
To Set
STEP 1: Press key. Receive dial tone.
STEP 2: If setting for another station, press MULTI-
LINE APPEARANCE.
STEP 3: Press FWD-BY or dial “Call Forwarding –
Busy Line” access code. Receive special dial
tone.
STEP 4: Dial destination station or external telephone
number. Receive service set tone.
STEP 5: FWD-BY LED lights (at your station or at the
DT Series of the multiline station you are set-
ting).
STEP 6: Press key. Call Forwarding – Busy
Line is set.
Using Soft Key
STEP 1: Press FDB Soft Key. Receive special dial
tone.
STEP 2: Dial destination; wait for service set tone.
STEP 3: “FORWARD SET” is displayed; Call Forward-
ing – Busy Line is set.
To Verify (Only For Terminal With LCD)
STEP 1: Press FWD-BY.
STEP 2: Display indicates the station number calls are
forwarded to.
To Cancel
STEP 1: Press key. Receive dial tone. If can-
celing for another station, press MULTILINE
APPEARANCE.
STEP 2: Press FWD-BY or dial “Call Forwarding –
Busy Line” cancel code. Receive service set
tone. LED goes out at your station (or the DT
Series of the multiline station).
To Next Page
Loading...
Need help?
General