155
To Cancel At Boss’ Station
With caller on the line
STEP 1: Lift handset or press key. Receive dial
tone.
STEP 2: Press Boss’ line appearance.
STEP 3: Press MW-CANCEL line/feature key. Re-
ceive service set tone.
With caller on the line
STEP 1: While engaged in conversation on boss’ mul-
tiline, press MW-CANCEL key. No service
set tone is heard.
BOSS SECRETARY OVERRIDE
Example:
Station 2000 is boss, Station 2001 is secretary.
Boss is connected to Trunk A.
Incoming call on Trunk B connects to secretary, but is
intended for boss.
To Program Boss/Secretary Override Key
STEP 1: Press key.
STEP 2: Press a One-Touch Speed Calling key.
STEP 3: Dial “Boss/Secretary Override” access code.
STEP 4: Press key. – displays on LCD.
STEP 5: Dial boss’ station number.
STEP 6: Press key again.
Secretary
STEP 1: Lift handset to answer Trunk B, ask caller to
hold.
STEP 2: Press CALL HOLD feature key or
key and dial call hold access code. Receive
Dial Tone.
Note:
The secretary can hang up after taking a mes-
sage, and set a message lamp at any time by
going off-hook on the boss’ multiline and press-
ing the MW-SET key.
To Next Page
Loading...
Need help?
General