134
STEP 2: A three-party conference is established.
MANUAL INTERCOM
To Initiate
STEP 1: Press MICM, lift handset or press key,
ringback tone is heard.
STEP 2: Press the SIG key if it is desired for the called
station to hear ringing.
To Answer
STEP 1: MICM key flashes, indicating an incoming
call. Ring tone may also be heard.
STEP 2: Press MICM.
STEP 3: Lift handset or press key, LED lights
solid green.
STEP 4: If called station is engaged in a non-intercom
call, the station may press MICM after placing
original caller on hold (with key).
To Bridge Into A Manual Intercom Call
STEP 1: Press MICM, lift handset or press key.
STEP 2: A three-party conference is established.
Note:
Bridging is an optional feature.
Note:
The SIG key signals the corresponding station
when speaking over the intercom path is unnec-
essary.
Note:
Two-button Manual Intercom provides one button
for signalling and one for talking. A separate sig-
naling button can be used in many ways for the
secretary to alert a boss, or vice versa.
To Next Page
Loading...
Need help?
General