NEC DTL-24D-1 - DT330 - 24 Button Display Digital Phone User Manual

30
CONNECTING LINE CORD
STEP 1: Insert Line cord plug into Line connector on
the back of the telephone set until you hear it
click.
STEP 2: Thread the line cord through the groove on
the back of the telephone.
STEP 3: Lead the line cord out through the groove on
the tilt leg as shown in the figure below.
DT330/DT310
Line Cord
Line Cord Plug
Line Connector
Telephone
Line Code
Groove
Telpehone
Tilt Leg
Groove
Line Cord

NEC DTL-24D-1 - DT330 - 24 Button Display Digital Phone Specifications

General

Brand	NEC
Model	DTL-24D-1 - DT330 - 24 Button Display Digital Phone
Category	Telephone
Language	English