136
CONFERENCE
STEP 1: With call in progress, ask party to hold.
STEP 2: Press key, receive interrupted dial
tone.
STEP 3: Dial desired number.
STEP 4: After call is answered, press key. The
LED lights.
STEP 5: Three-way conference is established.
Using Soft Key
STEP 1: With a call in progress, press key and
dial desired number.
STEP 2: After call is answered, press CONF Soft Key.
Three-way conference is established.
STEP 3: If one party hang up, other two remain con-
nected. Conf LED goes out.
TO ESTABLISH A BROKER CALL
STEP 1: While engaged in a call and wishing to con-
sult a third party, press key. Caller is
automatically placed on hold.
STEP 2: Dial desired party to consult.
STEP 3: Press key to return to original caller.
Third party is automatically placed on hold.
STEP 4: By repeating these steps, it is possible to al-
ternate between calls.
TO ANSWER A CAMPED-ON CALL
STEP 1: While engaged in a call, receive the camp-on
indication (one short tone burst). LED of
key flashes.
STEP 2: Press key. Call in progress is placed
on hold.
STEP 3: Connection to camped-on call is established.
STEP 4: Press key to return to original call.
Camped-on call is placed on hold.
Note:
The Conf key is accommodated on only DTL-2E-
1, ITL-2E-1 and DTL-6DE-1. If using the termi-
nals without key, use a soft key or pro-
grammable feature key to which conference
feature has been assigned.
To Next Page
Loading...
Need help?
General