125
5. FEATURE OPERATION
TO ORIGINATE A CALL USING
SELECTIVE DIALING
(DYNAMIC DIAL PAD, PRESET
DIAL)
Dynamic Dial Pad
STEP 1: Enter desired telephone number (Digit Keys
0-9, *, and #).
STEP 2: LED on key lights and hear key touch
tone.
STEP 3: The dialed number appears on the top of
LCD.
Preset Dial
STEP 1: Enter desired telephone number (Digit Keys
0-9, *, and #).
STEP 2: The dialed number appears on the top of
LCD.
STEP 3: Lift handset or press key.
or
STEP 3: Press the originating Line Key and lift hand-
set.
Note:
Pressing the Speaker Key or going off-hook is not
necessary.
Note:
Originating call operation is cancelled by the fol-
lowing Soft Key operation;
- Press Exit key or Cancel Key.
- Press Clear Key and cancel by one digit.
Note:
This feature cannot use on ITL-2E-1.
To Next Page
Loading...
Need help?
General