146
STEP 3: Display indicates the station number calls are
forwarded to.
To Cancel
STEP 1: Press key. Receive dial tone. If can-
celing for another station, press MULTILINE
APPEARANCE.
STEP 2: Press FWD-NA or dial "Call Forwarding -
Don't Answer" cancel code. Receive service
set tone. LED goes out at your station (or the
DT Series of the multiline station).
STEP 3: Press key. Call Forwarding – Don’t
Answer is cancelled.
LOGGED OUT IP STATION - CALL
DESTINATION
To Set
STEP 1: Lift handset or press key.
STEP 2: Press the FDL Key or dial “Logged Out IP
Station – Call Destination” access code.
STEP 3: Dial destination station number; receive ser-
vice set tone.
STEP 4: Replace handset or press key.
Logged Out IP Station – Call Destination is
set.
Using Soft Key
STEP 1: Press FDL Soft Key; receive special Dial
Tone.
STEP 2: Dial destination station number.
STEP 3: Receive service set tone; “FORWARD SET”
is displayed.
Note:
Call Forwarding for Busy Line and Don't Answer
may be combined depending upon system pro-
gramming.
Note:
With Soft Key operation, FDB flashes on the dis-
play.
To Next Page
Loading...
Need help?
General