105
TO PLACE A CALL ON EXCLUSIVE
HOLD
STEP 1: Press key twice. Line appearance in-
dicates interrupted wink.
To Retrieve
STEP 1: Lift handset or press key.
STEP 2: Press held line. Use handset to converse.
If unanswered
STEP 1: After preprogrammed time, Automatic Recall
is initiated.
STEP 2: Visual and audible signal (rapid flash and ring
burst) is sent to station which placed call on
Exclusive Hold. Recall shows as a flashing
green LED on your phone, and solid red on
other phones with same line.
TO TRANSFER A CALL
STEP 1: After conversing, ask party to hold.
STEP 2: Press key. Receive interrupted dial
tone.
STEP 3: Dial destination station’s extension, hang up
or wait for answer.
Note:
If held line appears on other DT Series stations,
LED remains steadily lit red.
Note:
Only the DT Series that set Exclusive Hold option
can retrieve the call.
Note:
Exclusive Hold excludes any other phone from
picking up your held call. Exclusive Hold shows
as a flashing green LED on your phone. The
same line on other phones appears as a solid red
LED.
To Next Page
Loading...
Need help?
General