140
CALL PICK-UP (GROUP)
When Station Within Pick-up Group Rings
STEP 1: Lift handset.
STEP 2: Press CALL PICK-UP or dial “Call Pick-up”
access code (may be stored on One-Touch
Speed Calling key).
STEP 3: Connection to calling party is established.
STEP 4: If currently on a call, press key and
dial “Call Pick-up” access code.
The original party is placed on hold.
Using Soft Key
STEP 1: Lift handset and press PICK Soft Key.
STEP 2: Connection to calling party is established.
CALL PICK-UP (DIRECT)
To Program Pick-up Direct Key (One-
Touch Speed Calling Key)
STEP 1: Press key.
STEP 2: Press One-Touch Speed Calling key.
STEP 3: Dial “Direct Call Pick-up” access code.
STEP 4: Press key again.
When A Station Within System Rings
STEP 1: Lift handset, receive dial tone.
STEP 2: Press PICK-DIRECT and dial the station
number to be picked up.
– Or –
STEP 2: Dial “Direct Call Pick-up” access code and the
station number to be picked up.
STEP 3: Connection to calling party is established.
STEP 4: If busy, original call must be placed on hold
before new call can be picked up.
To Next Page
Loading...
Need help?
General