145
STEP 3: Press key. Call Forwarding – Busy
Line is cancelled.
Using Soft Key
STEP 1: Press FDB Soft Key.
STEP 2: Receive service set tone and “FORWARD
CANCEL” is displayed.
CALL FORWARDING - DON’T ANSWER
To Set
STEP 1: Press key. Receive dial tone.
STEP 2: If setting for another station, press
MULTI-
LINE APPEARANCE
.
STEP 3: Press FWD-NA or dial “Call Forwarding –
Don’t Answer” access code. Receive special
dial tone.
STEP 4: Dial destination station or external telephone
number. Receive service set tone.
STEP 5: FWD-NA LED lights (at your station or at the
DT Series of the multiline station you are set-
ting).
STEP 6: Press key. Call Forwarding – Don’t
Answer is set.
Using Soft Key
STEP 1: Press FDN Soft Key. Receive special dial
tone.
STEP 2: Dial destination; wait for service set tone.
STEP 3: “FORWARD SET” is displayed; Call Forward-
ing – Don’t Answer is set.
To Verify (Only For Terminal With LCD)
STEP 1: If verifying for another station, press MULTI-
LINE APPEARANCE while idle.
STEP 2: Press FWD-NA.
To Next Page
Loading...
Need help?
General