135
DIAL INTERCOM
To Initiate
STEP 1: Lift handset or press the key.
STEP 2: Press DICM key.
STEP 3: Dial desired intercom station number. Re-
ceive ringback tone.
To Answer
STEP 1: DICM LED flashes, indicating an incoming in-
tercom call.
STEP 2: Press DICM.
STEP 3: Lift handset or press key. LCD shows
solid green.
STEP 4: If called station is engaged in a non-intercom
call, the station may press DICM after placing
the original call on hold (with key.)
To Bridge Into A Dial Intercom Call
STEP 1: Press the DICM key, lift handset or press
key.
STEP 2: A three-party conference is established.
Note:
Bridging is an optional feature.
Note:
Dial intercom provides a Dial Intercom group
where each member of the group may be called
by a 1- or 2-digit number without using their
prime lines.
To Next Page
Loading...
Need help?
General