CHAPTER 3 SYSTEM DATA PROGRAMMING
– 116 –
NWA-008855-001 Rev.1.0
avch3001.fm
DESCRIPTION DATA
After assigning the IP-CS data, Make Idle the
IP-CS by this command.
When the IP-CS data has been assigned by
CM14, the IP-CS automatically becomes
Make Busy state.
•
(1)
(2)
Y=3
000-255: CS No.
0 : Make Busy (Forced)
1: Make Idle
2 : Make Busy after calls finished
M
CME5
END
CS DATA PROGRAMMING
To Next Page
Loading...
