NEC NEAX 2000 IPS - Page 162

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 152 –
NWA-008855-001 Rev.1.0
avch3001.fm
DESCRIPTION DATA
Specify whether the Status Information for
Application is sent to the D
term
SP30.
NOTE: Be sure to assign the second data
“0”.
•
(1)
(2)
Y=36
X-XXXXXXXX: Station No.
0: To send
1: Not sent
Specify whether the Sub station is controlled
as same as the main station, by a Message
Waiting lamp control signal sent from the
VMS.
•
(1)
(2)
Y=129
00-15: Service Restriction Class A
0 : Main station and sub station are con-
trolled
1 : Only main station is controlled
Assign the D
term
SP30 Station number key to
the D
term
SP30.
•
(1)
(2)
Y=00
My Line No. + + Key No.
X-XXXXXXXX: D
term
SP30 Station No.
Assign the PS station number key to the
D
term
SP30.
•
(1)
(2)
Y=00
My Line No. + + Key No.
X-XXXXXXXX: PS Station No.
Assign that PS is used as a wireless handset for
D
term
SP30 key to the D
term
SP30.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0B51: PS used as a wireless handset for
D
term
SP30
A
CM13
CM15
CM90
,
,
,
END
WCS FEATURE PROGRAMMING