ā 169 ā
NWA-008855-001 Rev.1.0
avch4001.fm
Switch Settings
The figure in the SWITCH NAME column and the position of in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE: Set the groove on the switch to the desired position.
B00 Red B channel status
ON : B0 channel of the No. 0 circuit is in use.
OFF : B0 channel of the No. 0 circuit is in idle.
Flash (60 IPM) : CS is not connected to the No. 0 circuit.
CS is in make-busy status.
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
DL0
(Rotary SW)
NOTE
0-F
For normal operation
1-F Not used
DL1
(Rotary SW)
NOTE
0-F
For normal operation
1-F Not used
SP (jumper SW)
For normal operation
DOWN Not used
LAMP
NAME
COLOR FUNCTION
0
0
0
0
Front
1
2
3
UP
PN-2CSIA-A (CSI)
To Next Page
Loading...
