NEC NEAX 2000 IPS - Page 185

– 175 –
NWA-008855-001 Rev.1.0
avch4001.fm
Switch Settings
This card has no switches.
LAMP
NAME
COLOR FUNCTION
BSY12 Red B channel status
ON : B2 channel of the No. 1 circuit is in use.
OFF : B2 channel of the No. 1 circuit is in idle.
Flash (60 IPM): CS (ZT) is not connected to the No. 1 circuit.
CS (ZT) is in make-busy status.
BSY11 Red B channel status
ON : B1 channel of the No. 1 circuit is in use.
OFF : B1 channel of the No. 1 circuit is in idle.
Flash (60 IPM): CS (ZT) is not connected to the No. 1 circuit.
CS (ZT) is in make-busy status.
BSY10 Red B channel status
ON : B0 channel of the No. 1 circuit is in use.
OFF : B0 channel of the No. 1 circuit is in idle.
Flash (60 IPM): CS (ZT) is not connected to the No. 1 circuit.
CS (ZT) is in make-busy status.
BSY02 Red B channel status
ON : B2 channel of the No. 0 circuit is in use.
OFF : B2 channel of the No. 0 circuit is in idle.
Flash (60 IPM): CS (ZT) is not connected to the No. 0 circuit.
CS (ZT) is in make-busy status.
BSY01 Red B channel status
ON : B1 channel of the No. 0 circuit is in use.
OFF : B1 channel of the No. 0 circuit is in idle.
Flash (60 IPM): CS (ZT) is not connected to the No. 0 circuit.
CS (ZT) is in make-busy status.
BSY00 Red B channel status
ON : B0 channel of the No. 0 circuit is in use.
OFF : B0 channel of the No. 0 circuit is in idle.
Flash (60 IPM): CS (ZT) is not connected to the No. 0 circuit.
CS (ZT) is in make-busy status.
PN-4CSIA (CSI)