Call Forwarding - Not Available
ND-91638-007(E) Page 7
Issue 6
Service Conditions
1. After an incoming call to a “Not Available-PS” is forwarded, if the PS becomes available (power on or goes
into cell), the PS can originate or receive a call even if the previous incoming call is connected to the VMS.
2. This feature has a priority to Announcement - PS No Answer/PS Out of Cell features.
3. A maximum of 3 digits can be used for the access codes for setting and canceling Call Forwarding - Not
Available.
4. The type of dial tone that the PS receives when there is a message (dial tone, Special Dial Tone or Voice
Guide) can be specified by the system data programming.
To Next Page
Loading...
