Calling Name Display - PS
ND-91638-007(E) Page 13
July, 2005 Issue 6
3. When station A or an attendant console calls a PS with Consultation Hold of another station B or a trunk,
the incoming call displayed on the PS can be selected whether station A/attendant console or the held station
B/trunk according to system data programming.
Note 1: A trunk is displayed only when the calling party number is received. If not, station A or an attendant
console is displayed regardless of system data.
Note 2: If station A or an attendant console is released while station B or the attendant console calls a PS in
Consultation Hold state, the incoming call displayed on the PS is changed to the held station B or
trunk. In this case, note that the display of the calling party number is not changed. Only the display
of the calling party name is changed to the held party name.
To Next Page
Loading...
