3-6 Options
2. Remove the expansion slot screw and cover (see Figure Section 3-10). Save the
expansion slot cover in the event the expansion board is removed in the future.
To remove the expansion slot cover from the inside of the ISA/PCI-Bus back-
board, remove the inside expansion slot screws shown in Figure Section 3-12.
Figure Section 3-10 Desktop Expansion Slots
Figure Section 3-12 Inside Expansion Slot Screw
ISA Slot*
ISA Slot
Shared ISA/PCI-Bus
Slot
ISA Slots*
*For half-length boards.
Slot Cover
Slot Cover Screw
(for top slot)
To Next Page
Loading...
