NEC Univerge SV9300 - To Register Personal Directory

DIAL BY NAME (DIRECTORY SEARCH)
103
4. Press Speaker key or to make a
call.
You will receive a dial tone.
Speaker key lamp lights red. →
Line key lamp lights green. →
81XXXXXXXXXX
JAMES SMITH
Recall
PICK
>>>>
5. Lift the handset to start a
conversation.
Speaker key lamp goes off. →
0:00:05 DDD
11:00 AM SUN 1 JUN 2014
MIC
Mute
TO REGISTER PERSONAL
DIRECTORY
Following explains how to register the called
party into the personal directory.
1. Press Soft key (DIR).
MARY SMITH [200]
11:00 AM SUN 1 JUN 2014
MIC
DIR
HIST.
>>>>
2. Press Personal Soft key.
[Personal Directory]
00: JAMES SMITH
81XXXXXXXXXX
Back
ENTRY
↑
Prev
↓
Next
3. Search the vacant area of directory.
Select one of the following operations.
 Press .
 Press Soft key (↑Prev) or Soft key
(↓Next).
[Personal Directory]
03:
Back
ENTRY
↑
Prev
↓
Next
4. Register the information of the
called party.
Press or Soft key (ENTRY).
[Personal Directory]
03:
NAME
NUMBER
DEL
OK
5. Press or Soft key (NAME) and
then register the name.
Up to 16 characters can be registered
for each name.
Please refer to TABLE OF INPUT
CHARACTERS for the character that
can be entered.
When returning to the previous screen,
press or Soft key (CANCEL).
When erasing a character,
press Soft key (BK).
6. Press or Soft key (SET).
[Personal Directory]
NAME : SMIT
(ABC)
CANCEL
BK
SET
7. Press or Soft key (SET) to
register the dial number.
Up to 30 digits can be registered for
each dial number.
(access code: up to 4 digits, called
number: up to 26 digits)