NEC Univerge SV9300 - Call Forwarding - All Calls

FEATURE OPERATION
82
2. Press the Soft key (>>>>) repeatedly
until display shows “FDN” when
Soft key is used.
MARY SMITH [200]
11:00 AM SUN 1 JUN 2014
FDA
FDN
>>>>
3. Press Soft key (FDN) or Call
Forwarding - No Answer feature key.
[CF-Busy/No Answer]
Forward to : 201
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
4. Press .
[CF-Busy/No Answer]
CANCEL
11:00 AM SUN 1 JUN 2014
5. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
CALL FORWARDING - ALL
CALLS
This feature allows all calls directed to a
particular extension to be rerouted to an
alternate destination, regardless of the busy or
idle status of the extension.
TO SET CALL FORWARDING
- ALL CALLS
This feature is set by Soft key or feature
key. The feature key is set by system
data setting at initial installation. For
details, please contact the system
administrator.
1. Press the Soft key (>>>>) repeatedly
until display shows “FDA” when
Soft key is used.
MARY SMITH [200]
11:00 AM SUN 1 JUN 2014
FDA
FDN
>>>>
2. Press Soft key (FDA) or Call
Forwarding - All Calls feature key.
[CF-All Calls]
Forward to : _
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
3. Dial the desired target terminal
number.
[CF-All Calls]
SET 201
11:00 AM SUN 1 JUN 2014
4. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
TO VERIFY
1. Press Soft key (FDA) or Call
Forwarding - All Calls feature key.
The terminal number of the forwarding
destination is displayed on the LCD.