NEC Univerge SV9300 - TO CHANGE FONT SIZE

TERMINAL SETUP
41
Control. When you set Backlight Fade Control as
“Enable”, LCD is smoothly turned On/Off.
1. Press key to display the Menu
Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
4. Select “ Display”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
5. Select “ Advanced”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
6. Select “ Backlight Fade Control”.
Select one of the following operations.
 Press , or Soft key (OK).
 Press .
7. Select whether to turn On/Off the
LCD smoothly.
Select one of the following operations.
 Highlight an item by using , and
press or Soft key (OK).
 Press or , and press or
Soft key (OK).
TO CHANGE FONT SIZE
Following explains how to change the Font Size
displayed on the LCD.
1. Press key to display the Menu
Screen.