EasyManua.ls Logo

NEC Univerge SV9300 - APPENDIX E TO SET BCA OPTION UNIT; TO ENABLE;DISABLE AUTO CONNECTION

NEC Univerge SV9300
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPENDIX D PAIRING WITH SMART DEVICE
121
APPENDIX D PAIRING WITH SMART DEVICE
GENERAL DESCRIPTION
Bluetooth Connection Adapter (BCA) is an option unit which is mounted at the bottom of the terminal. It
provides a connection path between the terminal and smart device through Bluetooth interface.
With this BCA option, you can use terminal handset for the incoming call to the smart device. Also, it
offers hands free conversation by using microphone and speaker of the terminal. If there is a sound
source such as music in the smart device, it is possible to listen to the sound from the speaker of the
terminal.
Bluetooth
®
is a registered trademark owned by Bluetooth SIG, Inc. and licensed to NEC
Corporation.
(1) BCA Option UNIT
BCA option unit provides two operation modes as follows.
Wired Telephone Mode
The terminal operates as an extension of communication server. The terminal starts operation
with this mode after starting up the communication server.
Mobile Phone Mode
The terminal is connected with smart device via Bluetooth.
When there is an incoming call to the smart device, it is possible to answer by lifting up the
handset of the terminal.

Table of Contents

Other manuals for NEC Univerge SV9300

Related product manuals