NEC Univerge SV9300 - DND (DO NOT DISTURB)

FEATURE OPERATION
68
2. Dial abbreviated code.
Example: “09” is entered.
09
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
3. The phone number is automatically
dialed.
81XXXXXXXXXX
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
4. Lift the handset.
Speaker key lamp goes off. →
0:00:05 81XXXXXXXXXX
11:00 AM SUN 1 JUN 2014
MIC
Mute
ORIGINATING A VOICE
CALL
Instead of ringing, this feature informs the
incoming call by voice.
This feature is set by Soft key or feature
key. The feature key is set by system
data setting at initial installation. For
details, please contact the system
administrator.
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
Line key lamp lights green. →
200
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
2. Dial extension number.
You will receive a ring back tone.
201
11:00 AM SUN 1 JUN 2014
Recall
VOICE
CB
>>>>
3. Press Soft key (VOICE) or Voice Call
feature key.
VOICE CALL 201
11:00 AM SUN 1 JUN 2014
Recall
VOICE
CB
>>>>
4. Lift the handset and announce an
incoming call by voice to called
party.
Speaker key lamp goes off. →
5. Start conversation after called party
answered.
201
11:00 AM SUN 1 JUN 2014
MIC
Mute
"VOICE" is displayed on the LCD of
called party.
THREE/FOUR-PARTY
CONFERENCE
This feature provides a terminal user the ability
to add-on another party to a call already in
progress.