NEC Univerge SV9300 - Call Forwarding - Busy Line

FEATURE OPERATION
80
1. Terminal “a” dials 201. (The called
party is a call in progress.)
You will receive a busy tone.
BUSY 201
11:00 AM SUN 1 JUN 2014
CB
CW
>>>>
2. Press Executive Override feature
key. →
You will receive a warning tone.
 Talking three parties.
OVER RIDE 210 201
11:00 AM SUN 1 JUN 2014
MIC
Mute
CALL FORWARDING -
BUSY LINE
This feature permits a call to a busy extension to
be routed to a designated terminal.
TO SET CALL FORWARDING
- BUSY LINE
This feature is set by Soft key or feature
key. The feature key is set by system
data setting at initial installation. For
details, please contact the system
administrator.
1. Press the Soft key (>>>>) repeatedly
until display shows “FDN” when
Soft key is used.
MARY SMITH [200]
11:00 AM SUN 1 JUN 2014
FDA
FDN
>>>>
2. Press Soft key (FDN) or Call
Forwarding - Busy Line feature key.
[CF-Busy/No Answer]
Forward to : _
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
3. Dial the desired target terminal
number.
[CF-Busy/No Answer]
SET 201
11:00 AM SUN 1 JUN 2014
4. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
TO VERIFY
1. Press Soft key (FDN) or Call
Forwarding - Busy Line feature key
The terminal number of the forwarding
destination is displayed on the LCD.
TO CANCEL
1. While being set the Call Forwarding
- Busy Line,
2. Press the Soft key (>>>>) repeatedly
until display shows “FDN” when
Soft key is used.
MARY SMITH [200]
11:00 AM SUN 1 JUN 2014
FDA
FDN
>>>>