TERMINAL SETUP
45
2.
Select “Setting”.
Highlight an item by using , and press
.
3.
Select “ User Setting”.
Select one of the following operations.
Highlight an item by using , and
press , or Soft key (OK).
Press .
4.
Select “ Setting Reset”.
Select one of the following operations.
Highlight an item by using , and
press , or Soft key (OK).
Press .
5.
Enter the password.
After entering the password, press
or Soft key (OK).
6.
Press or Soft key (OK).
Setting of a terminal has returned to
defaults.
When the password entry ends in
failure, the following error message is
displayed. In that case, press or Soft
key (OK) and retry the password entry.
When a password has been forgotten,
please contact the system
administrator.
TO DOWNLOAD A FILE
You can download files for Music on Hold and
Ringer Tone. When downloading these files, the
terminal needs to be connected to the network
that has FTP, TFTP or HTTPS server.
HTTPS protocol is supported for
terminal firmware 5.1.0.0 or later.
For details of terminal firmware version,
please contact the system
administrator.
For details on the FTP/TFTP/HTTPS
service, please contact the system
administrator.
1.
Press key to display the Menu
Screen.
To Next Page
Loading...
