NEC Univerge SV9300 - Receiving a Voice from Speaker; Talking Handsfree

FEATURE OPERATION
70
,
2. Press Feature key.
Feature key lamp lights red. →
3. Press Answer key.
Feature key lamp goes off. →
Answer key lamp lights red. →
ANSWER TO A CALL WITH
PRESET ANSWER
1. Ringing and the Call Indicator Lamp
flashing.
2. Lift the handset.
Call Indicator Lamp goes off.
TO CANCEL
1. While Answer key lamp lights red →
,
2. Press Feature key.
Feature key lamp lights red. →
3. Press Answer key.
Feature key lamp goes off. →
Answer key lamp goes off. →
RECEIVING A VOICE
FROM SPEAKER
It is possible to change the terminal to
“listen-only” during the call in progress. You can
hear the caller's voice from the speaker on the
terminal with putting the handset on the hook.
TO RECEIVING A VOICE
FROM SPEAKER
1. Call in progress.
201
11:00 AM SUN 1 JUN 2014
MIC
Mute
2. Press Speaker key.
Speaker key lamp lights red. →
3. Replace the handset.
You can hear the voice of calling party
from the speaker.
TO RESTART TALKING
1. Receiving a voice from the speaker.
2. Lift the handset.
Speaker key lamp goes off. →
TALKING HANDSFREE
Dialing or answering a call is possible without
lifting the handset.
TO SET HANDSFREE
1. Press Mic key or Soft key (MIC).
Mic key lamp lights red. →
TO CANCEL
1. Press Mic key or Soft key (MIC).
Mic key lamp goes off. →
TO MAKE A CALL WITH
HANDSFREE
1. Mic key lamp is going off. →
2. Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
200
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>