FEATURE OPERATION
91
PATTERN 2
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2.
Dial Whisper Page access code or
press Whisper Page feature key.
You will receive a feature dial tone.
3.
Dial desired extension number.
You will receive a service set tone.
4.
Listen to conversation and speak to
called terminal only.
TO ANSWER
1.
Press Answer key.
Call in progress is placed on hold.
A hold tone is not transmitted to the other
party of the original call.
Calling terminal and called terminal can
privately speak.
Answer key lamp lights red. →
2.
Press Answer key.
Answer key lamp goes off. →
Return to original call.
SYSTEM CLOCK SETUP
BY STATION DIALING
This feature enables a terminal user to adjust the
system clock.
The feature access code/feature key is
set by system data setting at initial
installation. For details, please contact
the system administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2.
Dial System Clock Setup access
code or press System Clock Setup
feature key.
You will receive a feature dial tone.
3.
Dial new time in 24 hr. format using
6 digits (HHMMSS).
You will receive a service set tone.
4.
Press Speaker key.
Speaker key lamp goes off. →
To Next Page
Loading...
