NEC Univerge SV9300 - Privacy Release; Return Message Schedule

FEATURE OPERATION
89
3. Dial the desired reminder time in
military format.
You will receive service set tone.
SET 0900
11:00 AM SUN 1 JUN 2014
4. Press Speaker key.
Speaker key lamp goes off. →
PRIVACY RELEASE
A terminal is engaged in a conversation, and
allows another terminal to enter the call in
progress.
The feature access code/feature key is
set by system data setting at initial
installation. For details, please contact
the system administrator.
1. Press Soft key (CONF) or
Conference feature key.
Line key lamp lights green. →
201
11:00 AM SUN 1 JUN 2014
MIC
CONF
Recall
2. Another terminal with the same line
appearance presses that Line key.
CONF 201 301
Mary
MIC
Mute
3. A three-way conference is
established.
CONF 201 301
11:00 AM SUN 1 JUN 2014
MIC
Mute
RETURN MESSAGE
SCHEDULE
This feature allows terminal user to register a
return schedule when leaving the office and have
the schedule display on the calling terminal LCD.
The feature access code/feature key is
set by system data setting at initial
installation. For details, please contact
the system administrator.
TO SET
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Return Message Schedule
access code or press Return
Message Schedule feature key.
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
3. Dial the number corresponding to
desired message.
Message Patterns
DIAL
MESSAGE
0
IN: BACK
HH: MM
1
OUT: BACK
HH: MM
2
AWAY: BACK
MM: DD
3
VACATION
MM: DD