APPENDIX E TO SET BCA OPTION UNIT
131
TO SET CONNECTION CYCLE
Connection Cycle is the interval of time to initiate the connection to the smart device through Bluetooth.
1.
Refer to TO ENABLE/DISABLE AUTO CONNECTION and display BCA option.
2.
Select " BCA Connection Settings".
Select one of the following operations.
Press , or Soft key (OK).
Press .
3.
Select " Connection Cycle".
Select one of the following operations.
Highlight an item by using , and press , or Soft key (OK).
Press .
4.
Select the interval of time.
Select one of the following operations.
Highlight an item by using , and press , or Soft key (OK).
Press - , and press or Soft key (OK).
TO SET INTERRUPT RINGING
Using BCA option, it is possible to receive a call from communication server as an extension. Also it is
possible to receive a call to a smart device from mobile phone network. If you are in conversation with
one side, the interrupt ringing will alerts you when there is an incoming call from another side.
To Next Page
Loading...
