NEC Univerge SV9300 - TO SET USABILITY; TO RESET TERMINAL SETTINGS

TERMINAL SETUP
35
5. Select “ Illumination”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
6. Select “ External Call” or “
Internal Call”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press or .
7. Select a desired illumination
pattern.
You can preview the designated
illumination pattern.
Select one of the following operations.
 Highlight an item by using , and
press or Soft key (OK).
 Press - , and press or Soft
key (OK).
TO ENABLE/DISABLE RTP
ALARM
Following explains how to enable/disable RTP
Alarm. The RTP Alarm tone allows the terminal
user to be notified that the voice packet is not
received in a certain period of time because of
the network delay etc.
1. Press key to display the Menu
Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
4. Select “ Talk”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
5. Select “ RTP Alarm”.