NEC Univerge SV9300 - To Set Auto Path Switch

APPENDIX E TO SET BCA OPTION UNIT
133
For the detail of the smart device vender and model that has been verified the proper
operation, please contact the system administrator.
iPhone and iPad are registered trademarks of Apple Inc.
TO SET AUTO PATH SWITCH
1. Refer to TO ENABLE/DISABLE AUTO CONNECTION and display BCA option.
2. Select " Auto Path Switch".
Select one of the following operations.
 Highlight an item by using , and press , or Soft key (OK).
 Press .
3. Select the type of smart device.
Select one of the following operations.
 Highlight an item by using , and press , or Soft key (OK).
 Press or .