NEC Univerge SV9300 - TO SET ILLUMINATION PATTERN FOR CALL INDICATOR LAMP; TO ENABLE;DISABLE RTP ALARM

TERMINAL SETUP
32
4. Select “ Incoming Call”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
5. Select “ Headset Ring”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
6. Select whether to ring the headset
ringer.
Select one of the following operations.
 Highlight an item by using , and
press or Soft key (OK).
 Press or , and press or
Soft key (OK).
TO SET RINGER TONE
This section explains how to set a ringer tone.
WHEN DISTINCTIVE
RINGING PATTERNS TO
DISTINGUISH INTERNAL
AND EXTERNAL INCOMING
CALLS IS PROVIDED
Leave the setting of “Ring Tone” to “
Automatic” (default setting).
Use each default ringer tone for both
external and internal incoming calls.
Ringing pattern is programmable on a
system basis. For details, please
contact the system administrator.
WHEN DISTINCTIVE
RINGING PATTERNS TO
DISTINGUISH INTERNAL
AND EXTERNAL INCOMING
CALLS IS NOT PROVIDED
You can set ringer tone from “Setting”. The
following explains how to set.
1. Press key to display the Menu
Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .