NEC Univerge SV9300 - Dnd (Do Not Disturb); Save and Repeat Anumber

FEATURE OPERATION
73
When you press a feature key with a
call in progress, the call will be
disconnected.
DND (DO NOT DISTURB)
This feature restricts incoming calls to a terminal.
This feature is set by Soft key or feature
key. The feature key is set by system
data setting at initial installation. For
details, please contact the system
administrator.
TO SET DND
1. Press Speaker key.
Call Indicator Lamp goes off.
Speaker key lamp lights red. →
Line key lamp lights green. →
200
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
2. Press Soft key (>>>>) when Soft key
is used.
200
11:00 AM SUN 1 JUN 2014
FDA
FDN
DND
>>>>
3. Press Soft key (DND) or DND feature
key.
SET
11:00 AM SUN 1 JUN 2014
4. Press Speaker key.
Speaker key lamp goes off. →
Line key lamp goes off. →
TO CANCEL
1. Press Speaker key.
Call Indicator Lamp goes off.
Speaker key lamp lights red. →
Line key lamp lights green. →
200
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
2. Press Soft key (>>>>) when Soft key
is used.
200
11:00 AM SUN 1 JUN 2014
FDA
FDN
DND
>>>>
3. Press Soft key (DND) or DND feature
key.
CANCEL
11:00 AM SUN 1 JUN 2014
4. Press Speaker key.
Speaker key lamp goes off. →
Line key lamp goes off. →
SAVE AND REPEAT A
NUMBER
This feature allows a terminal to save a specific
dialed number and then redial that number.
This feature is set by Soft key or feature
key. The feature key is set by system
data setting at initial installation. For
details, please contact the system
administrator.