NEC Univerge SV9300 - Making a Call; Answering a Call

FEATURE OPERATION
61
After Logout feature key is pressed, the
terminal is logged out within 10
seconds.
MAKING A CALL
This section explains Preset Dialing. Before
making a call, the terminal user can verify the
dialed number displayed on the LCD. When a
wrong number is entered, the user can correct
the number before originating the call.
TO MAKE AN EXTERNAL
CALL
Following explains how to make an external call.
1. Dial a desired number after dial the
Central Office access code, e.g.
.
81XXXXXXXXXX
11:00 AM SUN 1 JUN 2014
BK
2. Press Speaker key.
Originate a call.
Speaker key lamp lights red. →
TO MAKE AN INTERNAL
CALL
Following explains how to make an internal call.
1. Dial a desired number.
81XXXXXXXXXX
11:00 AM SUN 1 JUN 2014
Recall
VOICE
CB
>>>>
2. Press Speaker key.
Originate a call.
Speaker key lamp lights red. →
ANSWERING A CALL
This section explains how to answer a call with
Answer key.
TO ANSWER AN EXTERNAL
CALL
1. While hearing a ringing tone,
Call Indicator Lamp lights red.
Answer key lamp lights red. →
Line key lamp lights red. →
2. Press Answer key.
Call Indicator Lamp goes off.
Answer key lamp lights green. →
Speaker key lamp lights red. →
Line key lamp lights green. →
3. Lift the handset to answer the call.
0:00:05 26-255XX
11:00 AM SUN 1 JUN 2014
MIC
It is possible to answer a call by
pressing Line key that is flashing
instead of Answer key.
It is possible to answer a call by lifting
handset and then pressing Answer key
or Line key.
TO ANSWER AN INTERNAL
CALL
1. While hearing a ringing tone,
Call Indicator Lamp lights red.
Answer key lamp lights red. →
Line key lamp lights red. →
2. Press Answer key.
Call Indicator Lamp goes off.
Answer key lamp lights green. →
Speaker key lamp lights red. →
Line key lamp lights green. →