FEATURE OPERATION
85
4.
Dial .
The called party's extension will ring.
WHEN A CALLED TERMINAL
HAS BEEN SET TO TONE
FIRST
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
Line key lamp lights green. →
2.
Dial extension number.
The called party's extension will ring.
3.
Dial .
Wait for voice page alert tone.
4.
Start conversation with called party.
5.
The called party can reply.
ANSWER A VOICE CALL
HANDSFREE
This feature allows the terminal user to answer a
Voice Call without lifting the handset.
1.
You will receive an incoming Voice
Call.
2.
Press Mic Key.
Mic key lamp lights red. →
3.
Respond to call handsfree.
AUTOMATIC INTERCOM
Automatic Intercom provides a path for voice
announcement calls between two terminals
using a Line key. Private conversations can be
held. The Busy/Idle status of the associated the
terminal is displayed on the Automatic Intercom
feature key LED.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
TO INITIATE
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2.
Press Automatic Intercom feature
key.
The called terminal receives a tone burst.
To Next Page
Loading...
