FEATURE OPERATION
72
3.
Press Soft key (PICK) or Call Pickup
- Group feature key.
4.
Start conversation with calling
party.
CALL PICKUP - DIRECT
This feature permits a terminal user to pickup a
call to any other terminal in the system.
This feature is set by system data
setting at initial installation. For details,
please contact the system
administrator.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
1.
Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
2.
Press Call Pickup - Direct feature
key.
3.
Dial the extension number of ringing
terminal.
4.
Start conversation with calling
party.
MULTILINE APPEARANCE
This feature allows you to accommodate the
lines (another terminal number) other than My
Line on the Programmable line/feature keys.
When accommodating another terminal number
on the Programmable line/feature key, the user
can answer the call routed to another by
pressing the key that is assigned.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
TO ANSWER A CALL
1.
A call is terminated to the terminal
whose terminal number is
accommodated to the Multiline
Appearance feature key.
Call Indicator Lamp flashes.
Multiline key lamp flashes red. →
2.
Press Multiline Appearance feature
key.
Call Indicator Lamp goes off.
Speaker key lamp lights red. →
Multiline key lamp lights green. →
3.
Lift the handset to start a
conversation.
Speaker key lamp goes off. →
To Next Page
Loading...
