INTRODUCTION
15
(1) Plastic Cover
(2) Directory Card
(3) Directory Card Holder
(4) Grooves
CONNECTING HEADSET
CONNECTING HEADSET WITH TERMINAL
According to the following procedure, Headset is connected to HEADSET Connector which is located
bottom of terminal.
For the headset that is supported, please contact the NEC's dealer or NEC.
The headset which can be connected to the telephone is "HW510 (A10)/HW251N (A10)".
HOW TO CONNECT HEADSET
1.
Plug the modular plug of headset into the HEADSET connector on the bottom of
terminal.
2.
Fit the headset cord into the groove to be fixed.
To Next Page
Loading...
