NEC Univerge SV9300 - Call Forwarding - no Answer

FEATURE OPERATION
81
3. Press Soft key (FDN) or Call
Forwarding - Busy Line feature key.
[CF-Busy/No Answer]
Forward to : 201
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
4. Press .
[CF-Busy/No Answer]
CANCEL
11:00 AM SUN 1 JUN 2014
5. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
CALL FORWARDING - NO
ANSWER
When a call is placed to a terminal that does not
answer, this feature forwards the call to another
terminal.
TO SET CALL FORWARDING
- NO ANSWER
The Soft key that is used as Call
Forwarding - No Answer is same as
Call Forwarding - Busy Line (Soft key
(FDN)).
This feature is set by Soft key or feature
key. The feature key is set by system
data setting at initial installation. For
details, please contact the system
administrator.
1. Press the Soft key (>>>>) repeatedly
until display shows “FDN” when
Soft key is used.
MARY SMITH [200]
11:00 AM SUN 1 JUN 2014
FDA
FDN
>>>>
2. Press Soft key (FDN) or Call
Forwarding - No Answer feature key.
[CF-Busy/No Answer]
Forward to : _
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
3. Dial the desired target terminal
number.
[CF-Busy/No Answer]
SET 201
11:00 AM SUN 1 JUN 2014
4. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
TO VERIFY
1. Press Soft key (FDN) or Call
Forwarding - No Answer feature key.
The terminal number of the forwarding
destination is displayed on the LCD.
TO CANCEL
1. While being set the Call Forwarding
- No Answer,