NEC Univerge SV9300 - To Enable;Disable Volume Level Display; To Set Screen Saver

TERMINAL SETUP
38
TO ENABLE/DISABLE
VOLUME LEVEL DISPLAY
Determines whether or not to display the
following volume levels: handset receiver volume,
speaker volume, ringer tone volume and LCD
contrast volume.
1. Press key to display the Menu
Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
4. Select “ Display”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
5. Select “ Local Volume”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
6. Select whether to display the
volume level.
Select one of the following operations.
 Highlight an item by using , and
press or Soft key (OK).
 Press - , and press or Soft
key (OK).
If it is set to “ Automatic”, the “
Enable” is applied.
TO SET SCREEN SAVER
To set whether starting the Screen Saver when
the terminal is idle for a certain period of time.
1. Press key to display the Menu
Screen.